Flanges
EIL-Approved Flanges
EIL-Approved Flanges, various materials are available, including carbon steel, stainless steel, alloy steel, and other high-performance alloys. Because they are designed to withstand high temperatures and pressures, these flanges can be used in various industries.
IBR-Approved Flanges
IBR-Approved Flanges must be designed and manufactured following the regulations set forth by the IBR. IBR-approved flanges must be certified by a licensed inspection agency and tested to ensure they can withstand the pressure and temperature requirements of the intended use.
Stainless Steel Thermowell Flanges
Stainless Steel Thermowell langes are specialized parts used in industrial process control systems to shield temperature sensors (thermometers or thermocouples) from corrosive or abrasive substances, high pressure, or other environmental elements that could harm or compromise the measurement's accuracy.
Reducer Expander Flanges
Reducer Expander Flanges are essential parts of pipeline systems that provide various functions, including joining pipes of various sizes, boosting flow, lowering pressure drop, and attaching pipes to other pieces of machinery.
Flushing Ring Flanges
Flushing Ring Flanges are widely used in piping systems to make it easier to flush the lines. It helps flush away any remaining fluid or debris in the system; flushing rings are typically installed at the end of the pipe.
ARAMCO Approved Flanges
ARAMCO, the Saudi Arabian Oil Company, has its requirements for the materials and products they utilize. ARAMCO-Approved Flanges must comply with requirements for the type of steel used, its chemical composition, mechanical properties, heat treatment, and non-destructive testing, to name just a few.
Weld Neck Flanges
Weld Neck Flanges are specifically designed to be welded to a piping system. They are commonly used in applications requiring a solid connection at high temperatures or pressures. Weld Neck Flanges have a long, tapered hub welded to a pipe and a flange extending from the hub.
Socket Weld Neck Flanges
Socket Weld Neck Flanges are designed to be welded onto pipes using a socket weld connection. They are widely used in high-pressure piping systems where welding is necessary to make a safe and leak-free connection. For a more stable weld, socket weld neck flanges, like slip-on flanges, have a socket designed to fit over the pipe.
Slip-On Flanges
Slip-On Flanges one that is made to slide over a pipe's end and then be welded in place. These flanges slip over the pipe's end because they have a diameter that is just a little larger than the pipe's outer diameter.
Blinds Flanges
Blinds Flanges are a subset of piping flanges used to close off a pipe or valve's termination. They connect to other flanges or fittings and are flat plates with bolt holes. Depending on the application and the precise specifications of the piping system, blind flanges are frequently built of materials like carbon steel, stainless steel, or other alloys.
Screwed/Threaded Flanges
Screwed/Threaded Flanges are flanges with a threaded bore that can be screwed onto a corresponding pipe or fit with a matching thread. These flanges are widely used in low-pressure applications where welding is impractical or permitted. Additionally, they are ideal for piping systems used to transport gases or liquids under extreme pressure or with corrosive properties.
Long Weld Neck Flanges
Long Weld Neck (LWN) Flanges are used in pipelines to connect pipes, valves, and other equipment. It strengthens the flange and supports the pipe; LWN flanges have a long tapered hub. Carbon Steel, stainless steel, and alloy steel are frequently used to make LWN flanges.
Lap Joint Flanges
Lap Joint Flanges are used in piping systems to connect two pipes of different materials or sizes. It consists of two parts: a stub end welded to the pipe and a backing flange attached to the stub end.
Spectacle Blind Flanges
Spectacle Blind Flanges often called spectacle flanges or figure 8 blinds, are specialized flanges used in pipelines and piping systems to temporarily or permanently block off a piece of a pipe. Two metal discs joined by a central piece make up the flanges of spectacle blinds.
Ring Type Joint Flanges
Ring Type Joint (RTJ) Flanges are used in high-temperature and high-pressure applications, primarily in the oil and gas sector. A metal ring gasket fits into a carefully crafted groove on the face of flanges used in Ring Type Joints. Usually, soft iron, low-carbon steel, or other materials appropriate for a particular purpose are used to create the metal ring gasket..