M-Pipe & Fitting Solution Inc is a reputable company that manufactures and supplies high-quality screw fasteners. Screw fasteners are essential for building, making, and do-it-yourself jobs. They are often used to connect two or more things safely. Screw connectors come in various shapes, sizes, and materials for various situations. In this piece, we’ll talk about the different kinds of screw fasteners and what they’re used for.
Wood screws are made to hold two pieces of wood together. They’re generally made of steel, brass, or stainless steel. The tapered shank of a wood screw makes it easy to drive it into the wood without breaking it. Sharp and deep threads on the shank make a firm grip on the wood. There are different sizes, lengths, and types of heads for wood screws, such as flat heads, round heads, and pan heads.
Drywall screws are used to connect drywall sheets to wood frames or studs. Usually, they are made of steel and have a coating of zinc or phosphate to keep them from rusting. Wall screws have thin shanks and sharp threads that make it easy to go through the walls. They also have a bugle-shaped head that sits flush with the surface of the drywall. It makes it easy to cover with joint compound or paint.
Deck Screw Deck Screw
Deck screws are made to be used outside, like on decks, fences, and in gardening. They are usually made of stainless steel or steel that has been coated to prevent rusting from the weather. Deck screws have a sharp point and deep threads that hold the wood tightly. It keeps the boards from warping or splitting. They also have a head that is flat or countersunk and sits flush with the surface of the wood.
Metal Sheet Screw
Sheet metal screws join two or more thin pieces of metal together. They are usually made of steel or stainless steel and have sharp points and threads that allow them to cut through metal. Sheet metal screws have a flat or round head that sits flush with the surface of the metal. They also have a small nut under the head that helps to spread the load and keeps the screw from pulling through the metal.
Eye screws connect things with ropes, chains, or wires. They are usually made of steel or stainless steel and have a threaded base with a loop or eye on the top. Eye screws come in different sizes and lengths, and the highest load capacity is based on the size of the eye. They can be used in both indoor and outdoor settings.
Things can be attached to concrete, brick, or block walls with concrete screws. They are mostly made of steel or stainless steel, and the tip is sharpened to go through the wall’s hard surface. The threads on concrete screws are made uniquely, making them grip the concrete well. They also have a flat, or countersunk, head that sits flush with the object’s surface.
Hex screws, or hex bolts, are used in heavy-duty situations where a strong and safe fastener is needed. They are mostly made of steel or stainless steel, and their triangular heads need a wrench or socket to tighten. There are different sizes, lengths, and thread types for hex screws, such as wide thread and fine thread.
The Flat Head Screw
Flathead screws have a flat top and a tapered shank, allowing them to sit flush with the item’s surface. They are generally used when a smooth, even finish is needed, like when putting together furniture or making cabinets. There are different sizes, lengths, and types of flathead screws.
Screws with round heads
Round head screws have a rounded top and a tapered base, which lets them sit slightly above the surface of the thing they are screwed into. They are usually used for things like door locks or light fixtures where the screw head needs to be seen, or a decorative finish is needed. There are different sizes, lengths, and types of roundhead screws.
A screw with one thread
Single-thread screws have a single thread that goes along the body. They are mainly used for light jobs that don’t require a firm grip, like hanging pictures or putting together small furniture. There are different sizes, lengths, and kinds of heads for single-threaded screws.
Twin Thread Screws
Screws with twin threads have two threads that run parallel to each other along the length of the head. They often fix hinges or connect brackets, which need a firmer grip than a single-thread screw. There are many sizes, lengths, and kinds of heads for twin-thread screws.
Ultimately, screw fasteners are essential for building, manufacturing, and do-it-yourself jobs. There are many different kinds of screw fasteners, and each one has its qualities and uses. Wood screws, board screws, deck screws, sheet metal screws, eye screws, concrete screws, hex screws, flat head screws, round head screws, single thread screws, and twin thread screws are among the most common types of screw fasteners. It makes a solid and secure joint, and using the correct screw fastener for the job is essential. M-Pipe & Fitting Solution Inc provides certified fasteners that meet international standards such as API, ASTM, and ISO 9001:2015.
|Fasteners Types||Bolt, Nut, Screw, Washers, Rings, Studs Rod.|
|Application||Fasteners can be used in racing industries such as racing motorcycles and cars, sailing boats and medical equipment, etc.|
|Standard of Screws||DIN 84, DIN 85, DIN 912, DIN 916, DIN 931, DIN 933, DIN 960, DIN 961, DIN 963, DIN 964, DIN 965, DIN 966, DIN 6912, DIN 6921, ASME B18.2.1, ASME B18.3, ASME B18.6.2, ASME B18.6.3, ASME B18.6.4, ASME B18.7|
All information in our datasheet is grounded on approximate testing and is stated formal of our knowledge & belief. It’s presented piecemeal from contractual scores and doesn’t constitute any guarantee of properties or of processing or operation possibilities in individual cases. Our guarantees and arrears are stated simply in our terms of trade.
Homes & Buildings
Sea Water Equipment
Paper & Pulp Industry
- Wood Screw
- Drywall Screw
- Deck Screw
- Sheet Metal Screw
- Eye Screw
- Concrete Screw
- Hex Screw
- Flat Head Screw
- Round Head Screw
- Single Thread Screw
- Twin Thread Screw